Giant Pumps Direct Drive Only Triplex Plunger Pump - 2500 PSI, 2.5 GPM, 3450 RPM Part Number GXH2525-112H

Axial Positive Displacement Pump

Giant Pumps' GX Series are made in America and can be mounted vertically or horizontally. This pump has the ability to be powered by a gas engine or an electric motor. Integrated with the pump is a thermal relief valve. Valves are made using Delrin. 

We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements, use the following formulas:

Electric HP = (GPM X PSI)/1450

Gas HP = (GPM X PSI)/1100

*Engine power varies based on horizontal or vertical orientation, as well as by makes and models from each manufacturer.

• Specifications:
  
• Flow: 2.5 GPM
  
• Maximum Discharge Pressure: 2500 PSI
  
• Crankshaft Speed: 3450 RPM
  
• Maximum Inlet Pressure: 90 PSI
  
• Max. Temperature of Pumped Fluids: 80 °F
  
• Plunger Diameter: 0.63_
  
• Stroke: 5.1 mm (7.1° angle)
  
• Crankshaft Rotation: Either Direction
  
• Key Width (Horizontal): 3/4_ x 3/16_ Keyway
  
• Key Width (Vertical): 7/8_ x 3/16_ Keyway
  
• Inlet Ports: 1/2_ NPT
  
• Discharge Ports: 3/8_ NPT
  
• Crankcase Oil Capacity (Horizontal): 4.1 fl. oz.
  
• Crankcase Oil Capacity (Vertical): 4.7 fl. oz.
  
• Weight: 9 lbs.
  
• Key Component: Material
  
• Manifold: Brass
  
• Plungers: Stainless Steel
  
• Valves: Delrin
  
• Seals: Nitrile with Fabric Reinforcing
  
• Gear End: Aluminum
  

Includes the Following Accessories:

• Injector With 2.1mm Orifice
  
• 1/2" Thermal Relief Valve 
  
• 7/8" Wobble Plate Bore